Measuring Blinds
Measuring Windows for blinds installation is a very simple process that doesn’t take long. While each window might look the same, it might actually vary in size, hence why you should measure each window separately to avoid making any mistakes.
Please ensure that you adhere to the guidelines below before taking measurements of the window:
Always use metal tape measure for measurements accuracy.
Specified whether blinds are outside/inside mounted while placing orders
The model/type/pattern of window frame, window handle & lock, grill etc may affect the suitable blinds length. Please take these into account in order to obtain an accurate measurement.
When measuring, round the measurement to the nearest 0.5 inch (``).
State the size of blinds in the format of WIDTH x HEIGHT (W x H).
Please make sure all blind sizes are correct by triple checking the measurement.
INSIDE MOUNTED BLIND
How to measure Windows for Blinds that will be installed on the inside of the frame window:
It is recommended to measure the top of the window and the bottom of the window, then write down the smallest size among both taken as the windows may not be straight as you see.
Make sure that the depth of the window frame is suitable for the installation of the blinds. Consider any obstacles such as window holders, grill, and lock are not in the way.
OUTSIDE MOUNTED BLINDS
How to measure Windows for Blinds that will be installed on the outside of the frame window:
To reduce the incoming light between the window slit and enjoy maximum privacy, add 3 ``(inches) on each side of the frame window (top,bottom,left,right). But if your window is close to the wall or shall there be no more space on each side, you should take measurements of width according to the size of the frame window.
Survey 3 ``(inches) from the top of the window frames and more at least 3`` (inches) from the bottom of the frame. If you intent to make your room looks spacious, take the measurements from ceiling to floor.